3D product visualization and CGI
Products built from CAD and rendered for the views a camera cannot get, from exploded views to packshots.
Send a brief- You send
- CAD files, material references, approved finishes
- You get first
- A greycard review of cameras and timing
- Delivered
- Renders, turntables, stills, model files if agreed
- Often paired with
- Live-action plates and drawn graphics

Shot 1, 0:00 to 0:04
Ridge at dawn
- Live action
- AI-assisted
A runner crests a frosted ridge as the sun clears the horizon.
Why this medium: Only a real location sells cold air and early light. An AI-assisted cleanup removes a power line from the sky; a compositor reviews every frame.
Shot 2, 0:04 to 0:07
First sip
- Live action
- Animation
At the trailhead the runner pours coffee; a drawn line rises out of the steam.
Why this medium: The animated line is the idea of the spot (heat that lasts), so it starts inside a real moment.
Shot 3, 0:07 to 0:12
The line becomes a chart
- Animation
The line stretches across the frame into a simple temperature curve from 6 a.m. to noon.
Why this medium: A chart is clearer drawn than filmed, and it can be retimed for every cutdown.
Shot 4, 0:12 to 0:17
Inside the wall
- 3D
The bottle separates into its layers: outer steel, vacuum gap, copper lining, inner steel.
Why this medium: A camera cannot show a vacuum gap. A 3D model built from the product drawings can, accurately.
Shot 5, 0:17 to 0:20
Back on the trail
- Live action
- 3D
- Animation
- AI-assisted
The 3D bottle sits in the runner’s real hand; the drawn line wraps around it.
Why this medium: The blended shot joins the three media. AI-assisted rotoscoping speeds the hand matte; a person finishes the edges.
Shot 6, 0:20 to 0:24
Summit pour
- Live action
At the top, the runner pours and the steam is still there.
Why this medium: The proof moment stays real: the same coffee, the same bottle, filmed hours later.
Shot 7, 0:24 to 0:27
Twelve hours
- Animation
Kinetic type: twelve hours hot, twenty-four cold.
Why this medium: Type animates cleanly in every aspect ratio and language version.
Shot 8, 0:27 to 0:30
Packshot
- 3D
The bottle turns once and settles on the end card.
Why this medium: A rendered packshot is identical in every version and can be re-rendered for a new color.
3D is the part of an ad that shows a product exactly: its shape taken from the engineering drawings, its finish under any light, its inside opened up in a way no camera can film. Blendpipe uses 3D where accuracy, an impossible view or a shot that must repeat identically across versions matters more than a real location.
The blend map above lights the 3D track of the fictional Orlenna spot: shot 4, the exploded view inside the bottle wall (12 to 17 seconds); shot 5, the 3D bottle in the runner’s real hand (17 to 20 seconds); and shot 8, the packshot (27 to 30 seconds). That is 11 of the 30 seconds, all from one model built from the product drawings in week 4 and rendered in weeks 4 to 6.
What we build
Product visualization from CAD
A model built from the manufacturer’s CAD files keeps the product’s real dimensions and proportions. CAD is engineering geometry, not a render-ready model, so it is cleaned up first: surfaces repaired, hidden internal parts kept or removed as the shots need, and materials assigned. Accuracy depends on the source, so the plan asks for the current revision of the files, the approved colors and finishes, and physical samples to match against where they exist.
Exploded views and cutaways
The product separates into its parts, or opens to show what is inside. In Orlenna shot 4 the bottle wall comes apart into outer steel, vacuum gap, copper lining and inner steel. A cutaway shows how a product is built, not how well it performs: a claim such as “twelve hours hot” needs the brand’s own test evidence, and the render illustrates that claim rather than proving it.
Photoreal renders and packshots
Physically based materials and lighting for hero product shots, packshots and end cards. A rendered packshot is identical in every version of a campaign and can be re-rendered for a new color without a reshoot, which is why the Orlenna plan renders its final shot instead of filming it.
CGI environments
Rooms, landscapes and abstract spaces built in 3D when a location does not exist, cannot be reached or needs to change with each version. An environment can also extend a live-action set beyond what was built or filmed.
Turntables and stills
The same model produces 360-degree turntables for product pages and stills for retail listings and social posts, so the visual language of the spot carries into the rest of the launch.
The greycard review
Before materials, lighting and final rendering, every 3D shot is reviewed as a greycard (also called a grey pass): untextured gray models with the final cameras, animation and timing. It is a standard step in CGI production because the questions it answers are cheap to change in gray and expensive after look development. Is the camera in the right place? Does the exploded view read in 5 seconds? Does the packshot hold long enough for the end card?
The order after that is fixed in the schedule: look development against the approved style frames, a first render pass for review, notes, a revision pass and a final pass. Each step has a named reviewer on your side.
Render planning
Rendering is time on machines, and it belongs in the schedule as firmly as a shoot day. The render time calculator shows the arithmetic with the Orlenna numbers:
| Input or result | Value |
|---|---|
| 3D footage | 11 seconds at 24 fps |
| Frames per pass | 264 |
| Render time per frame on one machine | 6 minutes |
| Machine hours per pass | 26.4 |
| Machines rendering at once | 4 |
| Clock hours per pass | 6.6 |
| Clock hours for three passes | 19.8 (79.2 machine hours) |
The calculator assumes frames split evenly across machines and no failed frames, so the plan adds time for re-renders after notes and for passes rendered separately for compositing. The time per frame comes from one test frame of the heaviest shot, rendered during look development. Glass, liquids, steam, motion blur and higher resolution all push it up.
Aspect ratios change the plan too. A packshot framed for 16:9 and cropped to 9:16 loses about two thirds of the frame, so key 3D shots get a separate camera for each ratio in the deliverable matrix. Each extra camera adds frames to the render plan, and the plan counts them.
Example (fictional). The Orlenna 3D plan covers 264 frames: 120 for the exploded view in shot 4 (5 seconds), 72 for the bottle in the runner’s hand in shot 5 (3 seconds) and 72 for the packshot in shot 8 (3 seconds). The greycard of all three shots is reviewed in week 4, before look development. Shot 5 is rendered in separate passes (bottle, reflections, the shadow on the hand) so the compositor can match it to the live-action plate.
Render passes for compositing
When a 3D object joins live action, it is rendered in layers rather than as one finished image: the object, its reflections, the shadow it casts, and mattes that separate its parts. The compositor uses those passes to match the plate’s light, grain and focus. The plates and light reference that make this possible are captured on the shoot (see live action), and the whole process is described on mixed media.
What you send and what you get
You send the CAD files (current revision), material references, approved colors and finishes, product samples where they exist, and the claims the 3D shots will illustrate with the evidence behind them.
You receive the greycard review, look development frames, final renders in every agreed length and ratio, turntables and stills as agreed, and the model files if the contract includes them. Who owns a model built from your CAD is set in the contract, and any licensed 3D assets (stock models, textures, HDR images) are listed with their terms on the rights sheet; see rights and usage.
Launching a product that needs to be shown from the inside, or before samples exist? Send a brief with the CAD files you have, the placements and the deadline.