Pre-production checklist
Twenty checks across the plan, development, rights and the shoot, before money is committed.
See how we work- Use it for
- The last review before production starts
- Checks
- 20 in four groups: plan, develop, rights, shoot
- Example
- Orlenna, one shoot day in week 4 (fictional)
- Export
- CSV or print; progress stays on the page

Checklist
Most production problems are settled before anyone picks up a camera: an unapproved script, a missing release, a 3D shot with no light reference. This checklist collects twenty checks in four groups, in the order they usually come up. Tick each item as it is confirmed; progress stays on this page, and you can download a CSV or print the list for the pre-production meeting.
The groups follow the first stages of how we work: Plan, Develop, then the preparation for Make. The worked case is the fictional Orlenna Ridge Bottle spot, whose one shoot day falls in week 4 of an 8-week schedule.
Plan
These five checks confirm that the decisions are written down and signed off: the brief, the blend map, the deliverable matrix, the schedule with its reviewers, and the estimate with its contingency. If one is missing, the shoot is being planned against an assumption.
Example (fictional). By the end of week 1, the Orlenna plan gives a medium and a reason for all 8 shots, a matrix of 24 deliverables (3 lengths x 4 ratios x 2 languages), an 8-week schedule with named reviewers, and a line-item estimate with 10% contingency. Orlenna is an invented brand and every figure is an illustration.
Develop
Development turns the plan into material a crew can follow. Time the script against the spot length first: Orlenna’s 42-word voiceover reads in 16.8 seconds at 150 words per minute, and with 6 seconds of music-only moments it fills 22.8 seconds, leaving 7.2 seconds to spare (script timing calculator). Approve the storyboards or animatic, and the style frames for every animated and 3D look, before production starts; changes after that point mean rework. 3D needs the product drawings or CAD files, since the exploded view of outer steel, vacuum gap, copper lining and inner steel is built from them.
The claims check matters most. “Twelve hours hot. Twenty-four cold.” is a performance claim, so it has to match the test results the brand holds before it becomes kinetic type.
Rights and people
Talent agreements state the usage term, media and territory. Anyone recognizable signs a release, and so does the owner of any private property you film. Know the music route before the edit: for a commercial recording, the US Copyright Office says sync licenses are needed from both the composition owner and the recording owner (see the music licensing checklist). Voice or likeness work involving AI tools needs written consent, and every AI-assisted step is listed with its disclosure decided (AI disclosure checklist).
When union talent works under the 2025 SAG-AFTRA Commercials Contract, the Joint Policy Committee overview describes 48-hour notice before a digital replica is created or used, and consent through a Digital Replica Rider or a separate signed writing. The Orlenna plan uses no digital replica, synthetic performer or synthetic voice.
Shoot
Permits and insurance come first. In Colorado Springs, filming on private property needs the owner’s permission but no city or county permit. City parks need a permit applied for 14 days ahead ($250 per day, $500 at Garden of the Gods) and a $1,000,000 certificate of insurance naming the city. Drone filming permits for city parks are not currently available, and filming on the Manitou Incline and in Red Rock Open Space is not permitted. More on the Colorado Springs page.
The call sheet carries the weather forecast and a backup plan; a ridge shot that depends on dawn light needs a backup morning. Match the shot list to the blend map, including plates for 3D. In the fictional spot, shot 5 puts a 3D bottle in the runner’s real hand, so the crew shoots the hand plate and records light reference (an HDR panorama of the location, grey and chrome reference balls, lens and camera height) so the render can match the footage. Any drone work is flown by a certificated remote pilot, where flying is allowed at all.
Common mistakes
- Booking the shoot before style frames are approved. The look of the 3D and 2D layers decides how the plates should be lit and framed.
- No reference for 3D shots. Without light reference, a rendered product rarely sits in real footage without extra compositing days.
- Treating a release as a license. A release records that a person or owner agreed to be filmed; the talent agreement sets where and for how long the ad may run.
- Leaving disclosure to delivery. Deciding it now changes what is shot, logged and kept.
What to do next
Print the list for the pre-production meeting and assign an owner to each open item. Plan the shoot with the shot list worksheet, and after the edit hand over to the delivery specs checklist. To have Blendpipe prepare the production plan these checks start from, send a brief. Live-action production covers crews, casting and locations in more detail.